
BDA-L8544
MULT-PURPOSE SPECIALISED ANTISCALANT
TYPE – Specialised High Performance Dispersant and Antiscalant for Boiler Internal Treatments, Evaporators, Reverse Osmosis Systems, Cooling Systems and Process Waters such as Mining, Iron and Steel, Paper & Pulp, Sugar Processing and Critical Heat Exchange Operations.
BDA-L8544 is a specialized reacted polymer containing polymeric antiscalants, sequestrants and dispersants. It is designed to inhibit precipitation of calcium, magnesium and iron salts in the form of carbonate, sulphate, phosphate and silicate compounds.
Request More Info
Appearance : Clear Water White to Pale Yellow Liquid
Flash Point : Not Applicable
pH neat soln. at 25oC : 3.5 – 4.5
Specific Gravity at 25oC : 1.195 – 1.235
Solubility in Water : Complete
Total Solids Content % : 37.5-42.5
Viscosity : 100-350 cPs
BDA-L8544 is dosed as follows :
Dosage required will vary according to the potential precipitative salts present and a detailed analysis of the process water is recommended.
Dosages may range from 5mg/l through 25mg/l in make-up and/or feed dependent upon cycles of concentration and/or application. On line cleans will warrant higher dosages.
BDA-L8544 may be used for REVERSE OSMOSIS MEMBRANE TREATMENT; COOLING SYSTEM/PROCESS DISPERSANT or as a BOILER DISPERSANT ADDITIVE and as an adjunct to the boiler internal
treatment programmes such as – BIT-L50-HP as an extra additive when boiler water exhibits high suspend solid conditions or when scaling conditions are prevalent. It is also used extensively when boilers are being brought on line or taken off line at regular intervals.
Please refer to FDA acceptance and declaration sheet.
BDA-L8544 can be stored for up to 24 months from the date of manufacture, in its original, sealed packaging, at room temperature in a dry area. Containers must be kept undercover and out of direct sunlight.
This product can be safely stored in plastic type holding tanks designed to manage the specific gravity listed. BDA-L8544 must be protected from freezing. Protective clothing such as gloves and goggles should be worn when handling.

